Lead Came Method Accessories

Additional information

Choice Lead Dykes

Weight3 lbs
Dimensions11 × 4 × .75 in

Gemini Taurus 3 Ring Saw

Weight13 lbs
Dimensions10 × 16 × 18 in

Face Shield for Gryphette Grinder

Weight2 lbs
Dimensions6 × 7 × 8 in

1/4 in. Chisel 700 Tip for Weller 100PG Soldering Iron

Dimensions2.5 × 0.25 × 0.25 in

1/4 in. Standard Bit

Weight1 lbs
Dimensions1 × 1 × 1.5 in

1/8 in. Standard Bit

Weight1 lbs
Dimensions1 × 1 × 1.5 in

From: $0.00

Zinc Miter Saw

Not required, but highly recommended. This zinc saw will allow more easily and accurately cut frames for your stained glass panels. Includes three blades for the saw.

Out of stock

Replacement Zinc Saw Blades

Set of three 6 in. replacement blades for our suggested zinc miter saw (SKU: DM 5.5A6IN.)

Out of stock

Choice Lead Dykes

An extra pair of dykes are highly recommended to have for cutting wire and other task. You will want to cherish your primary pair of dykes for cutting lead. Using your lead dykes to cut wire or other things will damage them and cause a less clean cut when cutting lead came.

Gemini Taurus 3 Ring Saw

Gemini Taurus 3 Ring Saw

  • Motor: 1/5 Horse Power Belt Drive
  • 110V
  • RPM: 2800
  • Work Surface: 12.5" x 16.5"
  • Dimensions: 18" high x 16" wide x 10" long
  • Weight: 14 lbs.
  • Blade(s) Included: 1 stainless
  • Warranty (year(s)): 3
  • Non-US Configurations Available: Yes

This user-friendly, powerful saw has a throat depth of 5-5/8 inch which allows you to cut fused art glass and borosilicate glass easily.  The 1/5 Horse Power motor and long lasting blade will cut a piece of glass up to 1-1/2 inches thick. The Taurus 3 comes with one standard grit blade (5-3/4 inch). The blade cuts in all directions and even grinds as it cuts creating smooth edges which require little or no additional grinding.  Also included instructional DVD and blade stabilizer.  Needs minimal maintenance and is easy to clean up.  3 Year Warranty (excludes blade).

Out of stock

Stanton Stretcher with Lead Vise

Load one end of the lead came into the vise, lock the other end into the Stanton Stretcher and pull. Lead Vise included.

Out of stock

Face Shield for Gryphette Grinder

Add a face shield to the Gryphette or replace the face shield on your Twister/Convertible Grinder.

Out of stock

Came or Zinc Bender

Designed to bend zinc, brass or copper channel. It will not fold or crimp the channel. Mounts easily to work table. Bend "U" channels as well as "H" shapes, all on one set of rollers.

Out of stock

Leponitt Lead Knife

The curvature of the blade in this knife allows the user to apply minimal pressure and use a rocking motion in order to cut through lead easily.

Out of stock

1/4 in. Chisel 700 Tip for Weller 100PG Soldering Iron

Replacement tip for the Weller W100PG (blue handle) Soldering Iron. An extra iron tip is always a great thing to have on hand!

Out of stock

1/4 in. Standard Bit

Grinding pins have diamonds on the top face as well as the sides, they can be used to drill holes in glass. Once a hole is drilled, they can also provide fine grinding and elaborate shapes within the inner surface.

Out of stock

1/8 in. Standard Bit

Grinding pins have diamonds on the top face as well as the sides, they can be used to drill holes in glass. Once a hole is drilled, they can also provide fine grinding and elaborate shapes within the inner surface.

Out of stock

Category:
Login to your account